Logo
 
  Miscellaneous Products & In House PVC Fabrications

Plastic Coated Steel
Support Brackets
 
 
 
 
750mm or 1500mm long x Plastic Coated Steel support Bracket to suspend drain under foundation.
 
Code
Size
SB75075
for up to 65mm pipe(750mm long)
SB750120
for up to 100mm pipe(750mm long)
SB750175
for up to 150mm pipe(750mm long)
SB150075
for up to 65mm pipe(1500mm long)
SB1500120
for up to 100mm pipe(1500mm long)
SB1500175
for up to 150mm pipe(1500mm long)
 
 
 
 
A) 6mm diameter plastic coated wire hanger at 1200mm max CTS bent over 200mm each leg. Cut plastic coating from the hanger.

B) Cut a 50mm section of same diameter sewer pipe as being suspended, split along its length and cup onto underside of sewer pipe at each hanger location.
 
 
 
Expanda Tape
 
 
Code ET10440
 
10 strips per pack of 440mm x 75mm anti-corrosion tape impregnated with copper sulphate crystals on clear plumbers joining tape. For on site application to comply with Water Board or Engineers recommendations
 
 
 
Expanda Lube
 
 
Code EL125
 
 
125ml of lubricant particularly suitable for installation of rubber ring joints in stacks and drains.
 
Below is our in house
 
  PVC Fabrications
 
                 section
 
 
 
 
 
 

In House Fabrications.
 
 Don't just say "No it is not available". If yourself or customer has an enquiry, send it on to Storm Plastics, our creative team can cut, bend, fold, weld up and make almost anything out of flat plastic. The following pictures are some of the recent fabrication we have undergone.

241020081286.jpg
Custom D/P Adaptor for a range hood.
225mm_Valve_Flange_a1.jpg

Components ready for welding .
225mm_Fabricated_Fla1.jpg

Plastics Welding In House.
225mm_Fabricated_Fla2.jpg
 Finished Product. 

If you have a requirement for a specialised Stormwater or Sewer fabricated fitting, please don't hesitate to contact us at Storm Plastics.
MartyGreyWaterTankTo1.jpg
MartyGreyWaterTankIn1.jpg
MartyGreyWaterTank3q1.jpg
150x230x115dpadapt001.jpg
Down Pipe Adaptor made to order 150DP115230

We made for an order 200mm extendable 50mm PVC-U expandas for a high school science lab. Their requirement was that the bench tops are able to be raised and lowered depending on the height of the students. So the below pictures are of the DW50EXTEJ raised and also lowered so wheelchair access can be obtained. Great idea and concept. The pictures don't show the required bracket attached to the top of the expanda to take the load off the trap and waste during raising and lowering of the bench.
 
Click on below link for
 
 
DW50EXTEJatKenmoreSc1.jpg
DW50EXTEJ High school Lab Sink Ht Adjustable 250mm  
DW50EXTEJatKenmoreSc2.jpg
DW50EXTEJ Another Shot Of 250mm Ht Adjustable Lab Sink
DW50EXTEJatKenmoreSc3.jpg
DW50EXTEJ Sink Lowered For Wheelchair use.

PVC-U Hopper 540mm x 500mm x 225S/W round used on the Ipswich motorway.
PVCHopperFabrication1.jpg
PVCHopperFabrication2.jpg
PVCHopperFabrication3.jpg
 
 
 
Home  |   About Us   |   National Product Guide July 2009   |   Watermark Certified Products   |   Expansion Joints   |   Swivel Joints   |   Expansion Bends
  Silt Traps / Buckets - Plaster Traps - Grease Trap   |   Houseboat - Marine and Inland Water Vessels   |   Puddle Flanges / Floor Flanges   |   Stormwater Reducers / Adaptors   |   Installation   |   Technical Advice
  Brochure/Tech Notes download   |   DANGER Sodic Soils download   |   Engineers Installation Drawings   |   Storm Plastics Publications Photo Gallery   |   Miscellaneous Products & In House PVC Fabrications   |   Storm Plastics Out & About   |   Lightning Flash Newsletters PDF   |   Contact us
© Copyright 2011 Storm Plastics (S.A)
web design by havealook